>  Home  >  Products  >  Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
  • Sanding Cloth Flap Wheel with Shaft
APPLLICATIONS

Applications requiring maximum benefits of conformability and finishing rate. Provides fine surface finish. Best used for finishing flat surfaces and deburring and cleaning inner diameters and contoured surfaces.

Blending, finishing and cleaning on inside and outside diameters of ferrous and non-ferrous materials.

Deburring edges.

Removing flash and parting line.

 

Item No. size（mm） Grit Material
A10103 10*10*3 80-320 Aluminum oxide sanding cloth
A15153 15*15*3
A20103 20*10*3
A20153 20*15*3
A20156 20*15*6
A20206 20*20*6
A20256 20*25*6
A20306 20*30*6
A25103 25*10*3 60-120
A25153 25*15*3 60-320
A25156 25*15*6 40-320
A25256 25*25*6 40-320
A3053 30*5*3
A3056 30*5*6
A30103 30*10*3
A30106 30*10*6
A30153 30*15*3 60-120
A30156 30*15*6 40-320
A30206 30*20*6
A30256 30*25*6
A30306 30*30*6 40-400
A40106 40*10*6 40-320
A40156 40*15*6
A40206 40*20*6
A40256 40*25*6
A40306 40*30*6
A40406 40*40*6
A40506 40*50*6
A50106 50*10*6
A50156 50*15*6
A50206 50*20*6
A50256 50*25*6
A50306 50*30*6
A50406 50*40*6
A50506 50*50*6
A60106 60*10*6
A60206 60*20*6
A60256 60*25*6
A60306 60*30*6 40-400
A60406 60*40*6 40-320
A60506 60*50*6
A80206 80*20*6
A80256 80*25*6
A80306 80*30*6
A80406 80*40*6
A80506 80*50*6

 

Any sizes are available according to customer's requirement.

Sanding Cloth Flap Wheel with Shaft

Applications requiring maximum benefits of conformability and finishing rate. Provides fine surface finish. Best used for finishing flat surfaces and deburring and cleaning inner diameters and contoured surfaces.

Blending, finishing and cleaning on inside and outside diameters of ferrous and non-ferrous materials.

Send Inquiry
  • *Subject:
  • *Message:
    Note:HTML is not translated!
  • *Name:
  • *E-Mail:
  • *Phone:
  • *Country name: